Forklift Attachments Oregon - Many different jobs would be impossible without the help of forklift attachments. Forklift attachments make many jobs safer, easier and quicker to complete. In addition to general forklift training, operators must be properly training for each attachment they intent to use.
Forklift attachments come in a wide variety of hydraulic and non-hydraulic attachments. The benefits of utilizing a forklift attachment include decreasing:
1. Employee accidents;
2. Damage to stock;
3. Manpower;
4. Time; and
5. Fuel consumption.
Equipment Considerations
Forklift attachments can replace existing attachments or may be added to a machine that doesn’t already have one. There are many equipment factors to consider prior to adding or replacing any forklift attachments. Considerations include the carriage type, the forklift model, the capacity of the forklift and the number of hydraulic functions used to power the features of the attachment.
Not considering these issues will drastically increase the safety risks associated with operating the machine and its attachments. This can increase risks relating to operator safety, forklift damage, stock damage and more. Further safety factors must also be taken into consideration, which will be discussed in greater detail below.
Forklift Rating and Re-Rating
Manufacturers give forklifts a lift capacity rating that needs to be considered and adjusted when adding or changing forklift attachments. Manufacturers of forklift attachments usually offer calculators available online to estimate the safe lifting capacity when using a particular attachment. However, only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. Once the forklift manufacturer has re-rated the machine, it will ideally have a new specification plate that is factory authorized. The newly upgraded specification plate will replace the original plate and needs to be installed showing the new forklift rating.
Equipment Upgrades
It is vital to note when working with forklift attachments the equipment’s hydraulic function consists of a forklift valve that has a lever located near the operator which creates two areas for pressurized hydraulic passages for oil. Note that not every attachment is hydraulic; however, the hydraulic attachments provide more features compared to the number of valves the forklift offers. In these instances, one or more valves need to be added. There are numerous ways a valve can be added. There are many ways to add a forklift valve.Equipment manufacturers make forklift accessories for hose routing and valve placement. There are plenty of labor and parts involved which can be costly enough to make this an impractical solution. Other options include adding a cable reel and a hose in conjunction with a solenoid valve to divert oil from an existing location. The main issue is that the cable reels and hose may block the view of the operator and these items can be damaged. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. Since these hoses replace existing forklift hoses, they remain safe from external damage while maintaining clear vision for the operator.
Safety Considerations
Proper training must be obtained prior to fitting any forklift attachment. The operator needs to be able to remove, fit and operate the attachment.
Before using any forklift attachment, two safety issues need consideration.
The nominal load rating will be reduced on the forklift once any attachment is applied. The nominal load rating is determined with forks and a stock fork carriage. It is important to note that the real load rating may be significantly lower.
Using any type of forklift attachment will affect the center of gravity on the machine. Obviously, the stability of the forklift is reduced. Because the weight of the attachment will be placed in front of the forklift’s fulcrum point, it is necessary to drive the forklift as though it is partially loaded, even prior to picking up a load. Operators need to travel gently and slowly every time they use an attachment and take extra care while turning. As noted above, each attachment should be listed on the data plate of the forklift’s capacity.
Certain safety checks need to be done before using any kind of attachment. The forklift attachment must be permitted on the forklift’s data plate, locked properly, correctly attached, appropriate for the particular load and appropriate for the type of forklift being used.
List of Common Forklift Attachments
A list of the most common attachments and their general uses are set out below. This is just a sample list of some of the most popular forklift attachments. As you will see, the large variety of attachments available have the capacity to greatly increase the efficiency of many jobs.
SIDESHIFTER:
The operator can manipulate the forks laterally with a sideshifter. This allows for easier load placement without having to move the entire forklift.
FORK POSITIONERS:
Fork positioners allow the forks to travel apart or together with each other to adjust for different load sizes.
DIMENSIONING DEVICES:
Dimensioning devices feature cargo dimensions useful for creating better efficiency in trucks, trailers and warehouses. This technology is often used alongside billing systems that monitor volume.
ROTATOR:
Rotators help to right tilted skids and are useful for fast unloading and tackling custom load requirements. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
The roll and barrel clamp allows the forklift to grasp rounded loads including barrels. It is outfitted with different pressure settings to facilitate fragile options and often has a rotate function to simplify horizontal and vertical positioning.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Pole attachments are placed where the forks would normally be and are used for transporting carpet and rolled up linoleum.
SLIP SHEETER OR PUSH-PULL:
The slip sheeter or push-pull allows the operator to move sheets by clamping onto slip sheets. This is an option instead of relying on pallets. The slip sheet can be moved onto thin and wide metal forks to simplify loading or unloading by pushing the slip sheet. The “Save” variation allows the slip sheet to be taken off for reuse later. The “Standard,” attachment variation is another option.
DRUM HANDLER:
Allows for grasping drums, either with a spring-loaded jaw to grip the top lip of a drum, or with arms that encircle the drum, for transport.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper helps to transfer loose or liquid items into other containers.
MAN BASKET:
Lift platform meant for lifting workers and complete with railings and brackets for safety harnesses.
TELESCOPIC FORKS:
Allows operation in a warehouse using two pallet stacking where one shelf is placed directly behind another with no aisle between the two.
SCALES:
Enables operators to simultaneously weigh and transport pallets, eliminating the need to interrupt transport to travel to scales, and can be obtained in legal-for-trade weights for operations that bill by weight.
SINGLE-DOUBLE FORKS:
Allow movement of a single pallet or platform or two pallets side by side. With the correct attachment/s a single forklift can be used for multiple specialist materials handling tasks alongside normal lifting tasks, thus reducing the need for owning a specialist unit alongside a normal unit and the larger running and maintenance costs associated with multiple units.
SNOW PLOW:
Designed for snow removal and distribution but can also be used to move other types of loose material.
SKIPS:
Allows safe and speedy removal of waste to the appropriate skip or waste compactor. Skips are available in a roll-forward type and a bottom-emptying type.
BOOMS AND JIBS:
Jibs and boom offer extended forklift reach for transporting loads that are stacked deep or high or that are suspended. There are reach-over, low profile, precision lifting and extendable length options.
Forklift Attachment PDF
