Used Cushion Tire Forklift Oregon - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
There are drawbacks and benefits to both pneumatic and cushion forklift tire options. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are comprised of treaded or smooth, solid rubber which is positioned around and affixed to a metal ring or baseband. These kinds of forklift tires are cheaper to make and easier to maintain. Cushion tires have been designed to work on smooth surfaces such as interior loading docks and warehouse floors. These tires are designed to maneuver well within tight locations, due to their specific turning radius. Forklifts that use cushion tires can be lower to the ground compared to pneumatic tire models and the increase in vertical clearance is welcome for many applications. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
Pneumatic tire forklifts are excellent choices for working in locations with uneven or unpaved ground outdoors. Locations that have sharp debris or objects that could puncture a standard air pneumatic tires such as junkyards or lumber yards will benefit from solid resilient pneumatic forklift tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The type of forklift that utilizes cushion tires are for mainly inside applications with some limited outside use. Cushion tire forklifts are commonly used in warehouses and manufacturing plants. Work which requires forklift operations in tight areas, such as narrow aisles, are ideal for the use of a cushion tire forklift.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Since cushion tire forklifts do not need to house a larger internal combustion engine, they are more compact and easier to maneuver.
2) Lower Clearance
Forklifts built for indoor use with cushion tires generally have a lower clearance than pneumatic tire equipment, allowing the forklift to more easily navigate doorways and other obstacles such as lights and sprinkler systems.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Cushion tire forklifts are more environmentally friendly as they use electricity and produce no harmful emissions, compared to internal combustion engine models.
Forklift Tire Choice
The majority of forklift frames specify either a pneumatic tire or a cushion tire. Axles and tires are specific to a forklift frame and lifting capacity. The majority of forklift manufacturers create models to coincide with specific wheels and tires, usually cushion tires or pneumatic tires. Instead of trying to modify the forklift by picking the correct tire for a particular application, it is wiser to choose the forklift that will best suit the job at hand.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Sitting closer to the ground, cushion tire forklifts have a tinier frame compared to pneumatic tire forklifts. Cushion tire models can fit through doorways easier and avoid overhead obstacles. Although, cushion tire forklifts offer less ground clearance, this can cause damage to outdoor obstacles when the surface is uneven or unclear. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. This makes cushion tire forklifts ideal for warehouses and manufacturing facilities that have less space. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Pneumatic tires forklifts have air in them and are better for outdoor use such as in yard work or on gravel. Pneumatic tires can also be used inside but do not provide the advantages of low clearance, maneuverability or small turning radius. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
There are two kinds of pneumatic tires; the air-filled pneumatic tire is less expensive than the solid pneumatic tire. The solid pneumatic tire has no air inside and is made from solid rubber. This design makes the tire stronger against punctures or gouges. These solid pneumatic tires are best for scrap yards and lumber yards where the possibility of running over sharp metal scrap and debris, such as nails, in greatly increased. Similar to solid pneumatics, air pneumatics work well outdoors on asphalt, in gravel and in yards. However, air pneumatic tires are susceptible to being punctured or gouged. Due to their susceptibility for getting gouged or punctured, the work location must be free from sharp debris before driving the air pneumatic tires. Since air-filled tires deliver a bouncy sensation, they contribute to operator fatigue and discomfort. Due to this, numerous air pneumatic forklift users fill foam in their tires. This provides a smoother ride for the operator than the one experienced on solid pneumatic tires but also a less bouncy ride than air filled pneumatic tires. Flat tires can be filled with foam to keep them more durable and prevent flats. Filling an air pneumatic tire with foam usually takes approximately 3 days to fill and cure.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Lift limits are given for certain electric-powered cushion tire forklifts. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
