Mitsubishi outdoor forklifts have earned the status of operating at peak performance. To be able to get the longest life possible from your equipment, you have to take care of it and do frequent maintenance. The forklift would work optimally as safely and efficiently as possible if you take really good care of it. The following suggestions below would really help you maintain engine performance and increase engine life.
Daily or Pre-Shift Checks should be carried out: By frequently inspecting all of the fluid levels in the engine, as well as the additional related things described within the Maintenance and Operation Manual of the forklift, you will significantly maintain the performance and longevity of your equipment.
A PM or Planned Maintenance Program should be established and adhered to: A good planned maintenance program will closely follow the maintenance schedule of the engine which the manufacturer has set out. Some of the major things the planned maintenance program includes are replacing appropriate filters and the engine oil on a regular basis.
Implementing an engine oil analysis program is also extremely beneficial. It can help to provide a completely detailed breakdown of all the materials which are found in the oil. Like for instance, abnormally high amounts of metals or silica could indicate there may be a failed component inside of the engine. Moreover, these findings can indicate that the engine is ingesting dirty air. If these problems are checked and dealt with early on, you would greatly help reduce repair costs and increase the overall life of the engine.
The Air Filter needs to be Inspected or Changed: Weak engine performance or poor fuel economy could be the end result if you forget to check and or replace the air filter inside the engine on a regular basis. For example, engine life could be drastically reduced if you are operating with a restricted air filter which enables unfiltered and dirty air to be pulled into the engine.
Check the Cooling System: The life of an engine and its performance could be greatly affected by the cooling system. The engine is engineered and designed to work in a particular temperature range. When that range is exceeded, damage might happen to the internal components of the engine. Frequent maintenance must include replacing the engine coolant also. Failure to perform this kind of maintenance can lead to damaged engine parts, especially regarding any aluminum parts.