In the majority of cases, most people spend quite a bit of money purchasing their forklift. Therefore, it is very important to take good care of it so as to protect your investment well into the long run. It is really a good idea to know the procedures which are undertaken during taking care of and maintaining this equipment.
Among the best ways to tell how good the engine is working is by starting the forklift up and listening carefully to see how it works. Like for instance, if there are any knocks or misses, the equipment is faulty and this should raise several concerns. Moreover listen closely for any squealing noise that come from the belts because these sounds will provide you with a wealth of information.
Several of the main components requiring attention during maintenance include the gauges, horn, safety warning devices, the overhead guard and the lights. Any faulty components or burnt out light bulbs must be replaced as soon as they are noticed. It is also vital to check the wiring.
The battery compartment terminals must be cleaned after the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery should be checked so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
After the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle needs to be carried out. If there is a grease fitting on the axle make certain to apply some grease. Inspect the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. After that, check each and every other component of the machine like the wheels. If any type of problem or fault is detected, be sure to address it immediately in order to make sure the machinery is working at its safest and optimum levels.