Stock Number: EQC014727
Make: Manitou
Model: MLT523
Year: 2007
Stock Number: 2-18-UEATT-38
Make: Misc
Model: MAST
Stock Number: 232175
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013
Stock Number: 208609
Make: Hyundai
Model: 30L-7M
Year: 2015
Stock Number: 205474
Make: Mitsubishi
Model: FG45N-LE
Year: 2010
Stock Number: 2-16-261627
Make: Potain
Model: IGO50
Year: 2006
Used Mitsubishi Forklifts - Inventory Oregon top

Used Mitsubishi Forklifts - Inventory Oregon

Individuals who have studied efficiency in the warehouse has found that 50 to 60 percent of travel time is wasted in material handling facilities. The goal is to reduce forklift travel distance and time in certain ways which truly help avoid equipment abuse and product damage. Some of the most common efficiency barriers to numerous warehouses are discussed below.

The new products will not always be positioned where it makes the most sense, these products are usually stored wherever there is extra room. The frequently handled things are separated due to size or to storage handling requirements. Because of increased business, Stock-Keeping Units or SKUs have proliferated. Order-picking and replenishment speeds are lessened because of bad lighting. The lift truck fleet is too small and more round trips are needed using the same machine. Forklifts experience detours and slowdowns because of poor equipment maintenance and uneven floor surfaces. Inefficient warehouse design often leads to dead-end aisles and unproductive workflows.

If any of the above problems seem familiar at your place of work, or if you know ways to be more efficient overall, there are 3 main areas to concentrate on:

Storage, Shipping and Receiving Layout: Use a facility layout and draw a series of arrows reflecting the way your product flows. The best facilities offer a well-organized, single direction flow from receiving to shipping. If your arrows go in the opposite to the desired direction or double backwards in any spots or go in many different directions, then you have determined your inefficient areas.

Work to improve access to product destinations, lessen travel distances between destination and source, reduce bottleneck areas once you have identified your trouble spots. This could be done by re-vamping any forklift and high-travel congestion areas.

What is cross-docking? Consider cross-docking options for items that rapidly move throughout your facility. The cross-docked inventory is not stored inside the warehouse. It is transported from inbound delivery almost directly to outbound shipping. Some of the sorting and consolidation is usually performed within the shipping areas. The easiest objects to cross-dock are normally bar coded products with predicable demands and high inventory carrying expenses.

Mitsubishi FGC70K-3
The Mitsubishi FGC70K-3 in Oregon is ideally suited for a wide variety of tasks. The FGC70K-3 is two wheel drive with a straight boom that allows for a lifting height of 188 feet and a lifting capacity of 15000 pounds.
Mitsubishi FD135
The Mitsubishi FD135 in Oregon is ideally suited for a wide variety of tasks. The FD135 is two wheel drive with a straight boom that allows for a lifting height of 168 feet and a lifting ability of 30000 lbs.
Mitsubishi FD70E
With the ability to lift something 168 ft in the air, the FD70E in Oregon produced by Mitsubishi is ideal for many different applications...
Mitsubishi FD80
The two wheel drive Mitsubishi FD80 in Oregon is a diesel powered vehicle with an articulating boom that has a maximum lifting height of 168 feet...
Mitsubishi FD90
The lifting ability of the FD90 from Mitsubishi in Oregon is 20000 lbs. The FD90 model contains a diesel powered engine and a straight boom that stretches out to 168 feet.
Mitsubishi FGC55K-3
With a lifting capability of 12000 lbs, the Mitsubishi FGC55K-3 in Oregon is ideal for many different applications. This model also contains a propane powered engine, a 188 ft lifting height, and a straight boom.

The forklift has been around since the early 1920's. Since its inception, the forklift has become an indispensable machinery for the materials handling business...

Hybrid technology on Mitsubishi's dual fuel forklifts have remain mostly electric and use miniature internal combustion engines. The dual fuel units are really preferred by lots of people, as opposed to pure internal combustion or IC units...

The lift truck application all around the globe has grown in insurmountable measures when it comes to the manufacturing and warehousing industries...
Used Mitsubishi Forklifts - Inventory Oregon bottom left Used Mitsubishi Forklifts - Inventory Oregon bottom left