Stock Number: EQU006871
Make: CAT
Model: DP150
Year: 2006


Stock Number: 205443
Make: Jungheinrich
Model: EKS110L
Year: 2010


Stock Number: 2-18-UEATT-33
Make: Misc
Model: CARRIAGE


Stock Number: EQC011111
Make: Genie
Model: GTH844
Year: 2012


Stock Number: 2-16-600275
Make: Liebherr
Model: 132HC
Year: 1981


Stock Number: 1-16-600261
Make: Jekko
Model: SPX312
Year: 2017


Stock Number: EQU005031
Make: Taylor
Model: TEC155H
Year: 1993


Stock Number: 208400
Make: CAT
Model: 2ETC3500-48V
Year: 2014


Stock Number: 2-18-220431
Make: Misc
Model: CARRIAGE


Stock Number: 2-18-UEATT-41
Make: Misc
Model: MAST


Stock Number: 208379
Make: CAT
Model: GC55K
Year: 2015


Stock Number: 206191
Make: CAT
Model: CAT SKID STEER SWEEPER
Year: 2011


 
Daewoo Propane Forklifts

Daewoo Propane Forklifts

Change a Propane Tank
Forklifts fueled by propane are common in warehouse environments. These forklifts have a propane mount situated behind the operator. These tanks have to be replaced every so often because they have limited lifespans. Forklift drivers should always utilize care when handling propane tanks. Compressed gases are very dangerous, particularly because the gas is flammable. Always use care when removing and replacing propane tank to prevent being injured.

1 To change a propane tank, first stop the forklift while leaving the engine running, and turn off the valve on the tank. Let the forklift run until the engine dies. This process burns off the gas inside the transfer hose that connects the engine and the tank. Prior to taking the second steps, wear the correct safety equipment, like for instance insulated gloves made of either neoprene or leather. It is very essential for you to protect your skin from touching the compressed gas, which is extremely cold.
2 The tank hose has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 Leaks can be inspected just by applying soapy water to the valve and slightly opening it. If there is a leak, it would cause bubbles to foam from around the valve. If this happens, check the connection hose at the nut and the valve area. The connecting nut must be re-tightened if you detect any leaks around the valve area, and then perform the leak checking procedure again. Persistent leaks mean that the connecting hose and nut must be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank will have to be replaced.
4 Lastly, open the valve all the way to allow the gas to fill the connecting hose. Then you can start the forklift and continue working.

  • American Lincoln Sweepers
    You can find a huge variety of floor scrubbers and sweepers offered by North American and other Worldwide manufacturers. Small companies ... More
  • TCM IC Forklifts
    Since their launch in the material handling business in the 1920s, lift trucks have undergone a huge change. Nowadays, these machines ... More
  • Carelift Zoom Boom
    CareLift Equipment has been designing and building quality rough terrain forklifts ever since the year 1962. Each day the company ... More
  • Caterpillar Counterbalance Forklifts
    Forklift Manufacturers All over the world, companies produce around 100 different brands of forklifts. The industry is dominated by ... More
  • Daewoo Big Forklifts
    Daewoo moved into the construction industry, helping to make the new village movement, that was a part of the rural development program ... More