Stock Number: 2-18-UEF37
Make: Misc
Model: FORKS

Stock Number: 208424
Make: Mitsubishi
Model: FG50CN1
Year: 2014

Stock Number: EQU002520
Make: CAT
Model: GC40K
Year: 2008

Stock Number: 206880
Make: Hyundai
Model: 80D-7E
Year: 2013

Stock Number: 2-16-268336
Make: Terex-Comedil
Model: CTT561/A-32 HD23
Year: 2003

Stock Number: 2-18-UEF47
Make: Misc
Model: FORKS

Stock Number: EQU007476
Make: Tico
Model: ProSpotterDOT
Year: 2012

Stock Number: 207495
Make: Hyundai
Model: 160D-7E
Year: 2013

Stock Number: 2-18-09B3603M
Make: FLX
Model: FLX20012600S1H

Stock Number: 212376
Make: JLG
Model: 860SJ
Year: 2014

Stock Number: EQU005761
Make: Hyster
Model: E30Z
Year: 2010

Stock Number: 231780
Make: Tico
Model: ProSpotter
Year: 2013

Pecco Cranes

Pecco Cranes

Tower Crane Parts
Several of the most remarkable structures throughout the globe are built utilizing cranes. The newer cranes are utilized in order to reach higher heights. Tower cranes offer the means to transport and lift tools, building parts and supplies around a construction location. There are several different parts which assemble a tower crane when they are put together. Putting a tower crane together uses various pieces of construction equipment.

The tower crane base is typically made from a steel unit. The base of the unit connects to a custom pad made of concrete. This type of set-up provides the structure with stability. Overall, the construction should be engineered and constructed well so as to operate at optimum safety.

The mast of the tower crane provides height to the machinery. The mast is made of connected steel sections. The amount of sections determines the height of the crane. Usually, a tower crane has a design which allows the mast to grow during construction by adding further sections as the building process continues. This way the crane's height could be specified, ensuring it has sufficient height to perform the required work efficiently and safely.

Slewing Unit/Top Climber
Over the mast is the slewing unit. It houses the motor and machines which allows the crane to rotate. A top climber is the piece of machinery that enables the mast to grow. The top climber sits just beneath the slewing unit. Hydraulic rams inside the top climber enable the slewing unit to be disconnected from the mast by raising it higher.

The term "boom", refers to the working arm of a tower crane. The boom is made up of separate steel parts which are connected together, extending out from the top of the slewing unit and parallel to the ground. There is a trolley connected to the bottom that can extend the length of the boom. This particular trolley holds the hoisting mechanism.

  • American Lincoln Sweepers
    You can find a huge variety of floor scrubbers and sweepers offered by North American and other Worldwide manufacturers. Small companies ... More
  • TCM IC Forklifts
    Since their launch in the material handling business in the 1920s, lift trucks have undergone a huge change. Nowadays, these machines ... More
  • Carelift Zoom Boom
    CareLift Equipment has been designing and building quality rough terrain forklifts ever since the year 1962. Each day the company ... More
  • Caterpillar Counterbalance Forklifts
    Forklift Manufacturers All over the world, companies produce around 100 different brands of forklifts. The industry is dominated by ... More
  • Daewoo Big Forklifts
    Daewoo moved into the construction industry, helping to make the new village movement, that was a part of the rural development program ... More