Caterpillar Forklifts Oregon
Operating a forklift is a lot more complex compared to driving a vehicle. A lift truck operator must be really trained and skilled in using a forklift. Driving a lift truck requires a high level of concentration. The Occupational Safety and Health Administration or also referred to as OSHA reports that 85 people die in accidents related to forklifts per year. Around 35,000 individuals are injured each and every year in lift truck accidents. Nearly half of operator deaths are caused by a lift truck tip over.
In order to prevent tip overs, it is essential that drivers know how to correctly estimate the weight of a load. In the construction industry, the load weight is usually posted right on the load. If the load consists of cubes containing 90 concrete blocks and a concrete block weighs 16 kilograms, the total load weight would be about 1,360 kilograms. When a load is wet, the operator should take additional weight into account.
It could be unsafe if the operator makes poorly informed estimates as the loads actual weight and whether the machine can handle the load. If a driver cannot be certain regarding the weight of a load, he must ask for assistance from the supervisor.
Another cause of tip overs is failure to pull up near enough to a building to lift or place a load with an extended boom. It is vital to use the load chart to avoid tipping the lift truck. Even if a forklift does not really tip over, an accident has occurred whenever the rear wheels come off the ground. This means the limitations of the forklift have been exceeded. Even though damage may not be obvious, the back axle could have been broken when hitting the ground.
Forklifts may even tip when not carrying a load. An unloaded forklift can tip if an operator has positioned a load on scaffolding utilizing an extended boom. If the operator reverses the lift truck and turns suddenly while bringing the boom down, the forklift's center of gravity will be pushed to the edges and a tip over may take place. An operator should always use the joysticks to be able to lower and retract the fork.
- Skytrak Telehandlers Oregon
Within the telehandler business, SkyTrak telehandlers are among the top selling equipment. SkyTrak's equipment are dependable and user ... More
- Xtreme Telehandlers Oregon
The features on the XR842 roller boom telehandler, consists of a 28 foot 10 inch reach, a lift height of 41.5 feet, and a lifting ... More
- Komatsu Forklifts Oregon
With a few simple prescriptions, fleet managers can ramp up on overall productivity and safety measures and reduce costs and can plan ... More
- Mitsubishi Forklifts Oregon
Lifts are work platforms which are utilized to raise and lower individuals, supplies and equipment for work positioning and loading. ... More
- Yale Forklifts Oregon
Determine what forklift is best for you and your company by taking the time to do your homework. This can really save you or ... More
- Noble Forklifts Oregon
Noble 4 Wheel Drive Forklifts deliver supreme manufacturing quality, innovative engineering and excellent design. The company proudly ... More
- Toyota Forklifts Oregon
For improved ergonomics, better visibility, top productivity and dependability, choose Toyota lift trucks to fulfill your every ... More
- Kalmar Forklifts Oregon
Cargotec's Kalmar ship-to-shore solutions and container handling solutions are used in ports and terminals all around the globe. They ... More